LIGNOCOLOR Wood Lasur for indoor and outdoor use
Wood stain and Topcoat in one for painted and wooden surfaces.

 

The Lignocolor wood glaze is a water-based, environmentally friendly and low-emission glaze with integrated UV protection for outdoor use.

produkte-lasuren-holz-lasuren_9.jpg
produkte-lasuren-holz-lasur-lichtgrau-750-ml.jpg
produkte-lasuren-holz-lasur-transparent-750-ml.jpg
produkte-lasuren-holz-lasur-weiss-750-ml.jpg
icons 1_edited.jpg

DRYING TIME: 
30 minutes - 2 hours (depending on outside weather temperature / humidity

icons 1.png

COVERAGE: 9 - 12 m²/L per application (depending on the wood and desired opacity)

OIP.jpeg

APPLICATION: 
Flat brush 

icons 1.png

LOCATION:
Indoor and outdoor

icons 4.jpg

UNIT SIZES: 
750ml

produkte-lasuren-holz-lasuren_9_5.jpg
produkte-lasuren-holz-lasur-lichtgrau-750-ml_edited.jpg
produkte-lasuren-holz-lasur-weiss-750-ml_5.jpg
produkte-lasuren-holz-lasur-lichtgrau-750-ml_5.jpg

HOW TO USE

PREPARATION

Surface must be dry and clean. The raw wood or the intact old coating (without cracks and chipping) should be sanded evenly in the direction of the wood grain with a grain size of 180 - 240 and well dusted. Damaged surfaces and oily or waxy old coatings must first be completely sanded off. In order to avoid bleed through / discoloration due to tannic acid, we recommend applying our 2in1 eco-friendly stain blocker & primer (2 coats) beforehand.

APPLICATION

To paint, use a metal-free, soft flat brush and apply Lignocolor wood glaze evenly on the raw wood in the direction of the wood grain and distribute the excess evenly. After a drying time of approx. 3o minutes - 3 hours, perform a light intermediate grinding with approx. 240 grit and apply a layer again.